Dot Dot Dot
Reading time 6 Minutes

Tutorial: how to get to September in relax!

 (Reading time: 6 minutes)

I have a problem, but they're all on vacation.

Strange, Kalko Tronic never bothers...
Anyway, in case anything happens...

Because if it has to happen it does it as soon as you enter on vacation, on Friday night, or just before any important event, (as for toothache!),  Here is our tutorial to sleep peaceful dreams with Kalko Tronic.

Case 1: KalkoTronic has a sound alarm every 10 seconds

Simple solution

Maintenance alarm: the switchboard says that it is time for ordinary maintenance.
He won't stop working right away.It's just a warningTo silence it for 7 days simply press the reset button for 5 seconds (2 beep).
If you have the WiFi system check if you have the button on the WiFi to reset it directly from your smartphone without opening the box (some versions allow it).
Do it until you have your maintenance technician back, the machine will continue to work, a delay of 1 month does not affect your protection.

After maintenance the plant will return to 100% and you will be more relaxed.
If he's done some limestone in the pipes, be quiet. this will be removed with the use of water during use after maintenance.

Case 2:KalkoTronichas a critical alarm (continuous beep) and the blue lights are off. 😐

Case A: temperature alarm –Simple solution
Turn it off for about 1 hour: If you turn the alarm back on, there can be no overheating problem.

If it is in the suntry to create a shading on her to avoid "tanning her", the problem might be that.
Connect to the WiFi system and check the internal temperature during the alarm.
There is a usable kit in many models that allows you to insert an additional fan to reduce the internal temperature, ask your CAT: it will extend the life of the product!

Case B: a fuse is burned –Stop momentary plant
This can happen during a strong storm or there is a problem with hydraulics (e.g. excess condensation that has ruined the bands).
In this case we recommend turning off the car until the holiday exit.
Do not change it yourself because it could, in addition to being dangerous, there is a more serious problem with the card.

In this case, having the machine off can slightly increase the formation of limestone,but don't worry, 15/20 days of absence of service will not create major problems: at its new start theDiscrusting properties will eliminateprogressively the limestone that will have formed in the period of detention.

Case C: maintenance expired after maximum operating time –Stop momentary plant
In this case the machine worked for 1 year regularly and for an additional 6 months in maintenance alarm (1 beep every 10 seconds) and internal protection was activated.
As it is statistically tested that after about 18 months the antiscale effect is low and no longer has beneficial effects, the machine stops to preserve your investment.
If not, electronics would try to adapt to the situation."pushing" on power amps without however obtaining appreciable results:could therefore be damaged.
Here againTurn off the carand wait for the technician at the end of the holiday period,once the machine has been restoredeverything will return to 100%of operation.

Case 3: You can see a lot of condensed water on the pipe. 😐Simple solution

In summer the effect "CONDENSA" is evident because cold water (which cools the pipe) collides with the hot air, the effect "cold bottle when it comes out of the fridge".
In this case, even if the working bands are very resistant, they could be damaged by the outside water.
We recommend to ask your plumber to cover with adhesive anti-condensed bandage (the one from air conditioners, for example) the piping discovered above the KalkoTronic bands to reduce the amount of condensation that could go down and ruin the bands.

A ruined band can seriously compromise the operation of the system.
If you notice it and can check if under the bands are dry (by moving the protection slightly) you can let the plant work, but in September ask for verification by the service center.

Better spend more but be sure that the system works well 😉

Case 4:KalkoTronicIt's totally off. 😯

Check that the outlet where the power cord is connected has tension, maybe connect us a drill, a hair dryer, or anything else to verify that there is.
If what you’re attacking doesn’t turn on there’s probably a problem with the electrical system, if you find out there might be aSimple solution
If you turn on the KalkoTronic protection fuse is likely to have jumped due to an electric discharge or a thunderstorm.
If you are not able to replace it as for theCase 2You can wait until the end of your vacation to restore it.Stop momentary plant
If you will have some limestone in the pipes during this period of detention be quiet: will be removed with the use of water after the new start-up.

Case 5, the most serious:a pipe is washed and leaks water, we try temporary repair.

This is an extremely rare case, can happen mainly due to problems of wandering currents, perhaps in conjunction with very strong thunderstorms, with or without lightning, where very strong electric charges branch out in the pipes.
It can only be permanently repaired with hydraulic surgery.

We can try to reduce the damage.temporarily, with the use of a two-component metal or other solution that we will see together.

Fascetta Torro

WARNING:the methods described should only be used in cases ofEMERGENCYIf you can't quickly find a plumber to replace the pipe section, we also recommend what you have thesufficient manuality to perform them.
If you are not sure that you can do something on your own, you need to keep looking for someone for emergency surgery.

Otherwise: rSet up in a hardware store or a FAI-DA-TE supermarket and buy a metal repairer, insulation tape and metal straps to tighten (e.g. 40-60mm diameter for 1′′ 1/2 tubes).

First chance:Average difficulty

  1. close the general water and remove pressure by opening a cold water tap.
  2. clean well the area where you have seen water leak (maybe also using sandpaper)
  3. Follow the instructions given in the two-component for repair and apply it to the damaged part.
  4. use insulating tape and apply itas narrow as possibleover the two-component and the damaged piece also making 3-4 turns of tube, especially if the loss is on the thread.
  5. apply (if you succeed) the strap over the tape by pressing again, but in a moderate way (if you think appropriate, use 2)
  6. wait at least 1 hour or more before reopening the general water so that the bicomponent is well solidified.

Second Chance: Low difficulty

If it was in a smooth area of the tube try with a rubber patch.

  1. look for a piece of rubber (e.g. cutting it from a chamber of air)
  2. look for a twist strap to tighten (diameter 40-60mm for 1′′ 1/2 tubes)
  3. close the general water and remove pressure by opening a cold water tap.
  4. clean the pipe well and apply the piece of rubber where you have the leak.
  5. apply the tie and tighten strong so that the compressed rubber spreads a little and cover well the laundry part.
  6. Open the general water again.

It may not be enough but it could reduce the loss and allow you to arrive easily at the end of the holidays.

If the leak is on the top of the pipe and below are the Kalko Tronic bands we recommenddetach the machine until the end of the working periodand then contact your service center for the verification and possible restoration of the system, this to avoid a short circuit of the bands that would damage the electronics.

Third possibility:  Very low difficulty

Use American tape

Using the American tape could be one of the solutions, it is often advertised as a valid temporary option, however we do not believe it can be resolute, but an emergency attempt you can try to do it.
In any case, as with previous cases, we suggest to close the water and remove pressure, clean with glass paper,dry and clean wellso that the interested party is as much as possible free from dirt and above all smooth.
Only now go to nastrate with force by covering the area of the hole and doing some lap (possibly read the instructions or search for additional information on the net).
If it goes well, you can have a temporary repair for a long period of time for the operation of your plumber/Service Center.

If the loss is just a drop every now and then, do nothing,

wait September contacting the plumber or the service center.

Conclusions

As you can see there can be solutions and instructions to follow in case of emergency to arrive at the end of the holidays without great problems.

In September, our hydraulics will be able to restore everything 100%.

But remember: of problems with Kalko Tronic there will always be few... so

All you have to do is wish you good holidays!

 

Every operation is under your responsibility.
If you decide to intervene independently do so by complying with the safety rules and only if you have the appropriate manual / competence and with thediligence of the good family father.

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare

Your Shopping Cart

Close