Installation diagrams:
where to mount KalkoTronic
You can download the simple installation instructions contained in each KalkoTronic system at this link:
2024 – Tronchetti Instructions – Hydraulics – A4
Home or Condominium : After the Water Counter or the Autoclave
Kalko Tronic can be easily installed in your home plant using the predisposition for the softener (if any) or intercepting the general water pipe.
For the softener it is difficult to find space and discharge for water,Kalko Tronic makes installation easier.
Kalko Tronic allows you to install the system thanks to reduced dimensions.
Download the hydraulic data sheets:
Hydraulic Sheet Kalko Tronic July 2025
News: For housing,KT EasyLocksimplify the installation further, see the appropriate area.
Some examples of housing space, in this case an installation with bypass system is adopted.
Clicking on the image below you will find the KalkoTronic EasyLock scheme with faithful hydraulic dimensions.
The system is sent already mounted and ready to use.
In the absence of space you can adopt different configurations thanks to the Custom system that is sent disassembled and to be mounted, so you can also vary the installation by inserting it, for example, in line or L.
Photos and sizes, though close to reality, may differ from the installed product of a few cm.
The installation can obviously also be horizontal.
If necessary, you can also install it in "Line".
example of apartment installation in "LINE"
Anti impurities filter: RECOMMENDED ALWAYS.
Size: The type of machine Kalko Tronic is dependent on the section of the pipe and the number of apartments (house – apartment building)
I have a boiler Wall boiler (old or new)
If you insert a Kalko Tronic near the boiler you need to insert a pipe section of about 1.5-2 meters between the hydraulic KT and the boiler entrance, which is very easy to realize.
To obtain the space, it is sufficient to extend the pipe, often vertically, to the side of the boiler, so as to have the necessary space: in 90% of the cases, the only connecting pipes allow to reach the necessary distance (in the pipe path).
Not to be confused as a linear distance, the apparatus can be installed quietly alongside, under or above the boiler itself: under an example.
TECHNICAL NOTE: In the case of boilers or water heaters "RENEW" isRecommendeda steel mesh filter at the outlet of hot water to reduce the desincrusted in the tap filters.
Under the classic KalkoTronic installation system.
Autoclave presence: distances
Kalko Tronic must be installed after storage and after pumps.
In order to prevent impeller turbulence from affecting treatment (as for softeners) it is necessary to have at least 1.5 metres away (in piping).
With large flow pumps (condominal) it is recommended 2.5-3 meters.
Kalko Tronic in LINE
It may happen that there is no space to build a "U": Kalko Tronic can also be inserted online saving more space.
The technical office is at your disposal for clarification.
Heating plant with water HOT HEALTH: EFFICIENCY RECOVERY
If in a building the hot water is centralized we recommend a direct contact for a project specifically dedicated to you:We will strive to give you the solution that can solve your problems.
In general, the plants are 2 and in the following configuration:
Kalko Tronic Master system: is the main treatment after the water meter
Kalko Tronic Slave system:is the maintenance system, of small size, that allows to have the maximum yield from the circuit and the serpentine favoring the recovery and maintenance of the energy efficiency.
Its good operation allows you to achieve maximum savings!
Thermal solar panels and/or Heat Pump
It can also be installed without problems on accumulations and/or puffers, powered or heated by heat pumps, solar panels or both solutions.
KalkoTronic allows you to optimize and keep exchangers longer in efficiency, often recovering the lost one.
Warning: in case of maintenance to the storage boilers after the use of KalkoTronic there could be an effect of abundant calcareous residues on the bottom of the boilers, this is the disacrancing effect KalkoTronic and depends on the initial situation, so how much limestone was already present.
Also for new plants will form limestone on the bottom as the incrustant effect can manifest during periods of very low use of hot water (like summer) but break off during the winter with the increase of the flow of treated water inside.
We are at your disposal to find the best treatment dedicated to your plant.
Download file with real size:
Hydraulic Sheet Kalko Tronic July 2025
All the contents, both text, graphics, files, tables, images and information contained in this site are protected under copyright, patent and intellectual property laws, download and use is only authorised if addressed to the installation or design of systems with anti-limescale systems Kalko Tronic, for which it is prohibited to use or copy, partial or total, for other purposes.
Any product or company mentioned on this site are trademarks of their respective owners or owners and may be protected by patents and/or copyrights granted or registered by the competent authorities.
No content, not even part of it, may be copied, modified or resold for profit purposes or to draw any usefulness except after our written authorization.
