June 11, 2026
Reading time 2 Minutes
calibration
How long does the sweetener have to be calibrated?
A sweetener for drinking use (home/condomain) MUST BE PROCESSED FOR LAWS.
- The first person responsible is the installer who has to calibrate it according to the legislation at its first operational start.
- The second manager is the administrator of the building or the owner of the property who becomes first responsible for subsequent management and maintenance.
The law indicates that it must be calibrated to no less than 15°F of hardness and dissolved sodium in water can not exceed 200mg/l (some regions have tightened the law leading to 150mg/l, e.g. Lombardy region).
risks
Are there any risks?
However, this hardness is formed by intersections.
Those who declare to solve the lime problem completely are saying the false, if so were, probably, the softener may have been very low(often under 7°F).
The excess amount of sodium (too low quantities) could trigger corrosion phenomena on pipes or accessories containing metals (e.g. boilers, taps, household appliances).
Corrosion is greater if the hardness in the sodium water is less than 7-5°F because it turns out to be even more aggressive for an excess of sodium ions that also facilitate the occurrence of loose currents, especially in hot water, and reduction of the PH (acidity).
Excessively reducing hardness is also expensive in the management costs of the softener (more water consumption and salt for a more frequent number of regenerations).
Too sweet water but above all too rich in sodium can create, in the most sensitive subjects,itching, irritation, also severe skin inflammations, propensity to hair loss, increased hypertension, and other problems referred to in depths at your family doctor.
Under 5°F soaps no longer work properly and rinses, e.g. of the washing machine, are not enough to completely remove chemicals that remain more on the tissues in contact with the skin.
The excess amount of sodium (too low quantities) could trigger corrosion phenomena on pipes or accessories containing metals (e.g. boilers, taps, household appliances).
Corrosion is greater if the hardness in the sodium water is less than 7-5°F because it turns out to be even more aggressive for an excess of sodium ions that also facilitate the occurrence of loose currents, especially in hot water, and reduction of the PH (acidity).
Excessively reducing hardness is also expensive in the management costs of the softener (more water consumption and salt for a more frequent number of regenerations).
Too sweet water but above all too rich in sodium can create, in the most sensitive subjects,itching, irritation, also severe skin inflammations, propensity to hair loss, increased hypertension, and other problems referred to in depths at your family doctor.
Under 5°F soaps no longer work properly and rinses, e.g. of the washing machine, are not enough to completely remove chemicals that remain more on the tissues in contact with the skin.











